Home Page Forums Raspberry Pi Shields LwM2M Leshan Client and NbIoT Shield

Tagged: , ,

This topic contains 2 replies, has 3 voices, and was last updated by  jalexander50 1 month, 3 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #36221

    sedat.yilmaz
    Participant

    Dears,
    I bought an NbIoT Shield for Raspberry PI3 B+. I have been able to send AT commands and send a UDP message. But my problem is how I can run now my Java LwM2M client? When my raspberry is connected to WiFi it works, I was expecting after getting a connection with SixFab NbIoT shield I would be able to run my client using UDP (Coap). Is there any driver kind of S/W that I can use NbIoT Shield as a network card?
    Thanks

    #36559

    Saeed
    Moderator

    Hello,

    The shield does not have a driver. You can write your own program using the AT commands. You can get help from its library available in the GitHub.

    #36712

    jalexander50
    Participant

    You can set the raspberry pi up to setup the PPP connection when it boots. I did this exact thing. You may have to work out on the client some sort of management to test for a valid connection. Other than that this will work.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.